FaceID Pro home page
Connecting a Hikvision Terminal via ISUP
With the ISUP protocol, a Hikvision Face ID terminal only needs internet access: it connects to the FaceID Pro server on its own, with no static IP, port forwarding or VPN needed at the office.
Key benefits
- The terminal connects to the server on its own, with no static IP or port forwarding
- Real-time check-in and check-out events, with a photo if the terminal supports it
- Employee photos are pushed to the terminal remotely from the dashboard
- If the internet drops, events are stored on the terminal and delivered later
- Terminal status (online/offline) is visible in the dashboard
What is ISUP?
ISUP (formerly EHome) is a protocol that lets Hikvision devices connect to a cloud platform on their own. With a conventional connection the server reaches out to the terminal, so the site needs a static IP or port forwarding. ISUP works the other way around: the terminal connects to the server itself and keeps the connection open. FaceID Pro uses ISUP 5.0, and new terminals are connected only this way.
What do you enter on the terminal?
In the terminal's Platform Access (ISUP) settings you enter the server address, port, Device ID and ISUP key. The same Device ID is entered in the FaceID Pro dashboard as the "Terminal connection code" when adding the terminal; that is how the system identifies the device. We provide the server address and key during setup.
What works after connecting?
As soon as an employee shows their face, the event reaches the server (with a photo if the terminal supports it), is recorded in attendance and appears in the Telegram group. Employee photos are sent to terminals remotely from the dashboard. The terminal clock is synced with the server, and face recognition distance can also be adjusted from the dashboard.
What happens if the internet goes down?
The terminal stores events while offline and sends them after reconnecting. In addition, the server re-requests missed events from the terminal's log, so short outages don't cause any loss of attendance data.
Which terminals are supported?
Hikvision Face ID terminals with ISUP 5.0 support, such as the DS-K1T343 and DS-K1T673 series. Outbound connections to the server must not be blocked on the terminal's network; if you have a corporate firewall, we'll tell you which ports are needed during setup.
Frequently asked questions
Do I need a static IP for ISUP?
No. The terminal connects to the FaceID Pro server itself, so a regular internet connection at the site is enough. No static IP, port forwarding or VPN is required.
How is ISUP different from ISAPI?
With ISAPI the server contacts the terminal directly, so the terminal must be reachable from outside. With ISUP the terminal connects to the server itself. FaceID Pro adds new terminals via ISUP only.
Where does the terminal get its ISUP key?
The ISUP key is entered manually in the terminal's Platform Access settings. During setup we provide the server address and key, and the Device ID is entered in the dashboard as the "Terminal connection code".
How do I know the terminal is connected?
The "Devices" section of the dashboard shows the terminal's status (online or offline) and the time of its last connection.
How many terminals can be connected?
Many terminals across different branches can be connected to a single FaceID Pro account and viewed on one dashboard.